Rodasteel Corporation
slide_01

List of relevant standards

Product standards for bars and rolls

NormaDescription
EN ISO 9443-2018Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
UNI EN 10025-1: 2005Hot rolled products of structural steels -  General technical delivery conditions
UNI EN 10025-2: 2005Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
EN ISO 683-1: 2018Heat-treatable steels, alloy steels and free-cutting steels - Part1: Non-alloy steels for quenching and tempering
EN ISO 683-2: 2018Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering
EN ISO 683-3: 2018Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels
EN ISO 683-4: 2018Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels
EN 10088-1: 2014Stainless steels - Part 1: List of stainless steels
EN 10088-3: 2014Stainless steels - part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes
EN 10095: 2001Heat resisting steels and nickel alloys
ASTM A 576Steel Bars, Carbon, Hot-Wrought, Special Quality
UNI 7847- 79Hot rolled, unalloyed and alloyed special steel products, bars and coils,for surface hardening - Qualities, requirements and tests
EN 10207: 2018Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
ASTM A 479/A 479MStainless Steel Bars and Shapes for Use in Boilers and
Other Pressure Vessels
EN 10269: 2013Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 10272: 2016Stainless steel bars for pressure purposes
EN 10277: 2018Bright steel products - Technical delivery conditions
EN 10218-1: 2012Steel wire and wire products - General - Part 1: Test methods
EN 10218-2: 2012Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
EN 10263-1: 2003Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
EN 10263-3: 2003Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
EN 10263-4: 2003Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering
EN 10263-5: 2003Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technicald elivery conditions for stainless steels
EN 10270-1: 2011 +A1:2017Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire
EN 10270-2: 2011Steel wire for mechanical springs - part 2: Oil hardened and tempered spring steel wire
EN 10270-3: 2011Steel wire for mechanical springs - part 3: Stainless spring steel wire
DIN ISO 4782: 93Metal wire for industrial wire screens and woven wire cloth
ASTM A 29/A 29MGeneral Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
ASTM A 105/A 105MCarbon Steel Forgings for Piping Applications
ASTM A 182/A 182MForged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A 276Stainless Steel Bars and Shapes
ASTM A 314Stainless Steel Billets and Bars for Forging
ASTM A 493Stainless Steel Billets and Bars for Forging Cold Forging
ASTM A 581/A 581MFree-Machining Stainless Steel Wire and Wire Rods
ASTM 582/A 582MFree-Machining Stainless Steel Bars
EN ISO 683-17: 2015Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels

Dimensional standards

StandardDescription
EN 10059: 2004Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10060: 2004Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10061: 2004Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10278: 2002Dimensions and tolerances of bright steel products
EN 10020: 2000Definition and classification of grades of steel
EN 10021: 2007General technical delivery requirements for steel and iron products
EN 10027-1: 2016Designation systems for steels - Part 1 Steel names
EN 10027-2: 2015Designation systems for steels - Part 2: Numerical system
EN ISO 4885:2018Ferrous materials - Heat treatments - Vocabulary
EN 10079: 2007Definition of steel products

Standards for stainless products for welding

StandardDescription
EN ISO 14341:2011Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification
EN ISO 544: 2017Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings
EN ISO 3581: 2016Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification
EN ISO 14343: 2017Welding consumables Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels

Standards for fasteners

StandardDescription
EN ISO 898-1: 2009Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread
EN ISO 3506-1: 2009Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts, screws and studs
ASTM A193 / A193MAlloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
ASTM A194 / A194MCarbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A320 / A320MAlloy-Steel and Stainless Steel Bolting for Low-Temperature Service

Standards for mechanical and metallurgical tests

StandardDescription
EN ISO 14284: 2002Steel and iron - Sampling and preparation of samples for the determination of chemical composition
ISO 377: 2017Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing
EN ISO 376: 2011Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
EN ISO 6892-2:2018Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ASTM A370Standard Test Methods and Definitions for Mechanical Testing of Steel Products
EN ISO 6506-1: 2014Metallic materials - Brinell Hardenss test - Part 1: Test Method
EN ISO 6507-1: 2018Metallic materials - Vickers Hardness test - Part 1 : Test method
EN ISO 6508-1: 2016Metallic materials - Rockwell hardness test - Part 1: Test method
EN ISO 148-1:2016Metallic materials - Charpy pendulum impact test - Part 1: Test method
UNI 3244-80Microscopic examination of ferrous materials - Rating of non-metallic inclusions in steels with reference pictures
EN ISO 643:2012Steels - Micrographic determination of the apparent grain size
ASTM E 112Standard Test Methods for Determining Average Grain Size

Quality management and certification standards

StandardDescription
EN ISO 9001: 2015Quality management systems - Requirements
EN ISO 9004: 2018Managing for the sustained success of an organization - A quality management approach
IATF 16949:2016Quality management systems -- Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
EN 10168: 2004Steel products - Inspection documetns - Lista of information and description
EN 10204: 2004Metallic products - Types of inspection documents

 

 

 

 

 

 

 

DOWNLOAD List of relevant standards 

  • List of relevant standards

    The list of all the rules of interest for bars and coils, dimensional standards, general rules, rules for solder inoxidable products, bolts standards, standards for mechanical and metallurgical testing, standards of quality management and certification.

    ico download pdf Scarica il PDF